Our AC filter material replacement is a grey G2 filter material grade. It’s a washable polyester that meets the Australian standards. The polyester fibres are thermally bonded together into a interlocking pattern that traps dust and lint. It also minimizes surface loading. It is designed to be used for applications such as room airconditioning filters and domestic ducted HVAC filters in return air grills
Just remove your old dusty aircon filter material from its frame and insert our new material. You could even re-use your existing spline (depending on this condition) or use the new spline that comes with purchasing the DIY air conditioner filter material and spline.
With plenty of materials for sale and all with different grades, ensure you buy the correct grade AND correct size (thickness) for your aircon filter application.
Our AC filter material has a nominal thickness of 5mm and it also comes with 5mm spline to fit into the gap of the aluminium. This creates a nice tight fit preventing the material from coming out but also not too tight that you can’t fit it into your frame.
Some other aircon filter materials (higher grade) are thicker which may make it difficult to re-insert back into its frame.
Its suitable in applications such as room air conditioning filters, domestic ducted heating and cooling and return air grill filters.
Technical Data:
Temperature Resistance : 100oC Continuous
Fire Resistance : Manufactured with a fire retardant resin
Initial Resistance - At rated flow of 1.8 m/s : 27 Pa
AS1132 No 4 test dust - Average Arrestance : 75%
Dust Holding No 4 test dust : 225 g/m2 (per unit of effective face area)
If this sounds too difficult, please view our full frame air conditioner filter assembly that’s a simple swap over replacement. CLICK HERE to take you to our airconditioning filters.
If you need and further information, please Contact Us for a fast response.